Fish Ranch: Difference between revisions

From Bay Area Mesh
Jump to navigation Jump to search
No edit summary
Line 149: Line 149:
 
|Black cable + Yellow tape
 
|Black cable + Yellow tape
 
Switch VLAN 4 to 5 to use multi-wan.
 
Switch VLAN 4 to 5 to use multi-wan.
  +
 
Add VLAN 2 (DtD) and VLAN 25 (Management).
 
Add VLAN 2 (DtD) and VLAN 25 (Management).
 
|-
 
|-

Revision as of 17:59, 24 July 2022

Fish Ranch

Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)

Site Details

Configuration

Fish Ranch currently hosts an Juniper EX2300-C switch and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).

Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex). Problems with connection reliability were fixed by removing some tree branches (July 22nd, 2022).

VLANs
VLAN Description
1 AREDN WAN
2 AREDN DtD
3 AREDN LAN
4 APMRNET 44.4.59.0
5 (Proposed MultiWAN)
25 MGMT
26 K6MPP-INTERNET
Juniper Switch (192.168.100.12/24)
Port Description VLANs Notes
1 AREDN Edge Switch on Tower 1,2,(3) Yellow cable -> PINJ -> Black cable
2 KPFA Studio (4) Blue cable
3 (unused) (2)
4 San Bruno Dish 4 airFiber. Black cable -> PINJ -> Black cable + Yellow tape
5 (unused) (2)
6 Router / Eth1 (4) White cable
7 (unused) (2)
8 (unused) (4)
9 Router / Eth2 (25) Yellow cable
10 Router / Eth0 (26) Blue cable
11 K6MPP 25, (26) airFiber 60 LR. Red cable -> PINJ -> Black cable + Blue tape
12 ORCA 1, 2, 3, 4, 25 White cable -> PINJ -> Black cable
Edge Router 4 (192.168.100.9/24)
Port Description VLANs Notes
Eth0 K6MPP-INTERNET - Blue cable
Eth1 APMRNET 44.4.59.0 - White cable
Eth2 Management - Yellow cable

Other equipment

  • 192.168.100.10/24 - airFiber 60 LR to K6MPP
  • 192.168.100.11/24 - airFiber 60 LR to KPFA Bldg

Configuration (proposed)

Port Description VLANs PoE Notes
1 AREDN Edge Switch on Tower 1, 2, (3) Passive Black cable (unknown markings)
2 San Bruno Dish 5, 2 Passive Black cable + Yellow tape

Switch VLAN 4 to 5 to use multi-wan.

Add VLAN 2 (DtD) and VLAN 25 (Management).

3 KPFA Studio (4) Off Blue cable
4 Router / Eth0 (26) Off Blue cable
5 Router / Eth1 (4) Off White cable
6 Router / Eth2 (25) Off Yellow cable
7 K6MPP 25, (26) Passive airFiber 60 LR, Black cable + blue tape
8 ORCA 2, 4, 5, 26 802.3af/at Black cable (unknown markings)
9 Management (25) -
10 Internet (4) -

Assumes we make no changes to the current Router setup.

Notes

Part of the Bay Area Backbone.

Plans

See ORCA

Nodes

  • KJ6WEG-OAK-FishRanch-SectorM5
  • KJ6WEG-OAK-FishRanch-PBM5

Contacts

  • Christiaan Adams - KJ6WEG - csadams@gmail.com