San Bruno Mountain (Building 7): Difference between revisions
(46 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[File:San Bruno - HAM Tower.jpg|thumb|San Bruno Ham Tower]] |
[[File:San Bruno - HAM Tower.jpg|thumb|San Bruno Ham Tower]] |
||
Site located on San Bruno Mountain, next to Building 7, near the KTSF transmitter ([https://www.google.com/maps/@37.68675,-122.43525,17z map])([[San Bruno Mountain Photos|photos]]) |
Site located on San Bruno Mountain, next to Building 7, near the KTSF transmitter ([https://www.google.com/maps/@37.68675,-122.43525,17z map])([[San Bruno Mountain Photos|photos]]) |
||
+ | |||
+ | == Nodes == |
||
+ | [[File:San Bruno Mtn Shack Equipment.jpg|thumb|200x200px]] |
||
+ | |||
+ | === KN6PLV-SANBRUNO-HAP === |
||
+ | |||
+ | * Radio: Mikrotik hAP AC2 |
||
+ | * Antenna: Built-in (provides onsite wifi access to mesh) |
||
+ | * Location: Inside the HAM Shack |
||
+ | * Altitude: 385m |
||
+ | * Bearing: N/A |
||
+ | |||
+ | [[File:San Bruno - RM5.jpg|thumb|200x200px|On axis view from antenna]] |
||
+ | |||
+ | === KN6PLV-SANBRUNO-RAC5-1 === |
||
+ | |||
+ | * Radio: Ubiquiti Rocket 5AC Lite |
||
+ | * Antenna: 120° sector |
||
+ | * Location: 37.68674, -122.43525 |
||
+ | * Altitude: 387m |
||
+ | * Bearing: 159° toward Millbrae |
||
+ | |||
+ | [[File:San Bruno NSM5.jpg|thumb|200x200px|On axis view from antenna]] |
||
+ | |||
+ | === KN6PLV-SANBRUNO-RAC5-2 === |
||
+ | |||
+ | * Radio: Ubiquiti Rocket 5AC Lite |
||
+ | * Antenna: 120° sector |
||
+ | * Location: 37.68673, -122.43532 |
||
+ | * Altitude: 392m |
||
+ | * Bearing: 207° toward Skyline College |
||
+ | |||
+ | === KN6PLV-SANBRUNO-VNODE === |
||
+ | |||
+ | * Radio: None |
||
+ | * Antenna: N/A |
||
+ | * Location: 37.68673, -122.43532 |
||
+ | * Altitude: 392m |
||
+ | * Bearing: N/A |
||
+ | |||
+ | == Backbone == |
||
+ | [[File:San Bruno to Fish Ranch.jpg|thumb|200x200px|On axis view from antenna]] |
||
+ | |||
+ | === Dish to [[Fish Ranch]] === |
||
+ | |||
+ | * Radio: airFiber 5XHD |
||
+ | * Frequency: 6.025 GHz (FCC OET Experimental License [https://apps.fcc.gov/els/GetAtt.html?id=325016&x=. WN2XRO]) |
||
+ | * Bandwidth: 40 MHz |
||
+ | * Antenna: Ubiquiti RD-5G30-LW 30 dBi |
||
+ | * Location: 37.68678, -122.43527 |
||
+ | * Altitude: 400m |
||
+ | * Bearing: 56° toward Oakland |
||
+ | |||
+ | [[File:ToSanCarlos.jpg|thumb|200x200px]] |
||
+ | |||
+ | === Dish to [[San Carlos]], Swallow, [[Fire Station 8]] & [[Black Mountain (Site 4)]] === |
||
+ | |||
+ | * Radio: UISP LTU Rocket |
||
+ | * Frequency: 5.965 GHz (GCC OET Experimental License [https://apps.fcc.gov/els/GetAtt.html?id=327676 WN2XUD]) |
||
+ | * Bandwidth: 40 MHz |
||
+ | * Antenna: Ubiquiti RD-5G30-LW 30 dBi |
||
+ | * Location: 37.68678, -122.43527 |
||
+ | * Altitude: 400m |
||
+ | * Bearing: 149° toward San Carlos |
||
+ | * Read Only Access: mesh / aredn-back-bone |
||
== Site Details == |
== Site Details == |
||
Line 17: | Line 82: | ||
=== Power === |
=== Power === |
||
The site provide main power (without backup) as well as 24vdc, 12vdc and -24vdc (breakers not provided) with battery backup. No solar or generator. |
The site provide main power (without backup) as well as 24vdc, 12vdc and -24vdc (breakers not provided) with battery backup. No solar or generator. |
||
+ | |||
+ | Originally we used the provided backup 24vdc power, but switched to our own 200Ah battery (~2 days of power) to avoid negatively impacting the rest of the site's tenants. |
||
=== Configuration === |
=== Configuration === |
||
− | Currently the site has an Mikrotik hAP |
+ | Currently the site has an [https://mikrotik.com/product/hap_ac2 Mikrotik hAP AC2], two Ubiquiti Rocket M5 + 120 degree sector antennas, a Ubiquiti UISP Router, two Ubiquiti AirFiber dish - one pointing at Fish Ranch, the other at San Carlos, and a NUC11 server. All device are power either directly, or via the router, from the our own EdgePower with backup battery. |
{| class="wikitable" |
{| class="wikitable" |
||
|+Devices |
|+Devices |
||
Line 26: | Line 93: | ||
!Notes |
!Notes |
||
|- |
|- |
||
− | |[https:// |
+ | |[https://mikrotik.com/product/crs112_8p_4s_in MIkrotik Router CRS112-8P-4S-IN] |
|DHCP |
|DHCP |
||
| |
| |
||
Line 37: | Line 104: | ||
|DHCP |
|DHCP |
||
|to San Carlos, Management VLAN 100 |
|to San Carlos, Management VLAN 100 |
||
+ | |- |
||
+ | |[https://ark.intel.com/content/www/us/en/ark/products/217669/intel-nuc-11-essential-kit-nuc11atkc4.html NUC11] |
||
+ | |10.250.201.134 |
||
+ | |NUC11ATKC4 + 32GB Memory + 512GB NVME |
||
+ | |- |
||
+ | |EdgePower 24V |
||
+ | |DHCP |
||
+ | | |
||
|} |
|} |
||
{| class="wikitable" |
{| class="wikitable" |
||
Line 48: | Line 123: | ||
|2 |
|2 |
||
|AREDN DtD |
|AREDN DtD |
||
+ | |- |
||
+ | |10 |
||
+ | |Swallow XLINK |
||
|- |
|- |
||
|13 |
|13 |
||
Line 62: | Line 140: | ||
|} |
|} |
||
{| class="wikitable" |
{| class="wikitable" |
||
− | |+KN6PLV-SANBRUNO-ROUTER ( |
+ | |+KN6PLV-SANBRUNO-ROUTER (Mikrotik CRS112-8P-4S-IN) |
!Port |
!Port |
||
!Description |
!Description |
||
Line 70: | Line 148: | ||
|- |
|- |
||
|1 |
|1 |
||
− | |KN6PLV-SANBRUNO- |
+ | |KN6PLV-SANBRUNO-RM5 |
+ | |2 |
||
− | |2, 13, 15, (100) |
||
− | | |
+ | |24v |
+ | | |
||
− | |hAP provides DHCP address to non-AREDN devices |
||
|- |
|- |
||
|2 |
|2 |
||
Line 79: | Line 157: | ||
|2 |
|2 |
||
|24v |
|24v |
||
+ | | |
||
− | |Nodes are not given LAN or WAN access |
||
|- |
|- |
||
|3 |
|3 |
||
+ | |KN6PLV-SanBrunoMtn |
||
− | |W2GMD-SANBRUNO-RM5 |
||
+ | |(100) |
||
− | |2 |
||
|24v |
|24v |
||
+ | |[[Meshtastic]] node |
||
− | | |
||
|- |
|- |
||
|4 |
|4 |
||
+ | | |
||
− | |(aredn) |
||
− | | |
+ | | |
− | | |
+ | |Off |
| |
| |
||
|- |
|- |
||
|5 |
|5 |
||
+ | | |
||
− | |(aredn) |
||
− | | |
+ | | |
− | | |
+ | |Off |
| |
| |
||
|- |
|- |
||
|6 |
|6 |
||
+ | | |
||
− | |(aredn) |
||
− | | |
+ | | |
− | | |
+ | |Off |
| |
| |
||
|- |
|- |
||
|7 |
|7 |
||
|DISH-TO-FISHRANCH |
|DISH-TO-FISHRANCH |
||
− | | |
+ | |13, 100 |
− | |24v |
+ | |24v |
| |
| |
||
|- |
|- |
||
|8 |
|8 |
||
|DISH-TO-SANCARLOS |
|DISH-TO-SANCARLOS |
||
− | |15, 100 |
+ | |10, 15, 16, 100 |
− | |24v |
+ | |24v |
| |
| |
||
|- |
|- |
||
+ | |sfp9 |
||
− | |9 |
||
+ | | |
||
− | |Local management |
||
+ | | |
||
− | |(911) |
||
| - |
| - |
||
+ | | |
||
− | |SFP, 192.168.91.1 |
||
+ | |- |
||
+ | |sfp10 |
||
+ | | |
||
+ | | |
||
+ | | - |
||
+ | | |
||
+ | |- |
||
+ | |sfp11 |
||
+ | |KN6PLV-SANBRUNO-HAP |
||
+ | |2, (100) |
||
+ | | - |
||
+ | |hAP provides DHCP address to non-AREDN devices |
||
+ | |- |
||
+ | |sfp12 |
||
+ | |KN6PLV-SANBRUNO-SRV |
||
+ | |2, 10, 13, 15, 16, (100) |
||
+ | | - |
||
+ | | |
||
|} |
|} |
||
{| class="wikitable" |
{| class="wikitable" |
||
Line 131: | Line 227: | ||
|- |
|- |
||
|1 |
|1 |
||
+ | |to EdgePower 24V |
||
− | | |
||
− | |( |
+ | |(U) |
+ | |Reconfigured as a "LAN" port to access the EdgePower which also provides PoE |
||
− | |WAN |
||
|- |
|- |
||
|2 |
|2 |
||
| |
| |
||
+ | | |
||
− | |2, 15, (U) |
||
+ | | |
||
− | |Custom config provide LAN + DtD on ports 2-5 |
||
|- |
|- |
||
|3 |
|3 |
||
| |
| |
||
− | | |
+ | |(U) |
| |
| |
||
|- |
|- |
||
|4 |
|4 |
||
| |
| |
||
− | | |
+ | |(U) |
| |
| |
||
|- |
|- |
||
|5 |
|5 |
||
|KN6PLV-SANBRUNO-ROUTER |
|KN6PLV-SANBRUNO-ROUTER |
||
− | | |
+ | |(U), 2 |
|Provides DHCP addresses to LAN devices |
|Provides DHCP addresses to LAN devices |
||
|} |
|} |
||
=== Notes === |
=== Notes === |
||
− | Part of the [[Bay Area Backbone]] connecting to [[Fish Ranch]]. |
+ | Part of the [[Bay Area Backbone]] connecting to [[Fish Ranch]], [[San Carlos]] and Swallow. |
=== New Mounts === |
=== New Mounts === |
||
New mounts have been design using a 2" galvanized pipe attached to galvanized struts using pipe clamps. The struts are in turn attached to the tower using beam camps. The design can be found [[:File:Mount @ San Bruno Mtn.pdf|here]]. |
New mounts have been design using a 2" galvanized pipe attached to galvanized struts using pipe clamps. The struts are in turn attached to the tower using beam camps. The design can be found [[:File:Mount @ San Bruno Mtn.pdf|here]]. |
||
+ | All our equipment is mounted on two of these new mounts. |
||
− | === Plans === |
||
+ | === Future Plans === |
||
− | * Run a wifi scan at the proposed antenna mount point to see how noisy it is |
||
+ | No current plans. |
||
− | * Reposition airFiber link to Fish Ranch for optimal signal strength (to be honest, this seems pretty good already) |
||
− | == |
+ | === Completed Work === |
− | [[File:San Bruno to Fish Ranch.jpg|thumb|200x200px|On axis view from antenna]] |
||
− | === |
+ | ==== August 2024 ==== |
− | Radio: airFiber 5XHD |
||
+ | * Adjusted azimuth of RAC-1 to provide a better connection to City Hall in San Bruno. From the map, the sector is no longer centered on City Hall (it was before) but for whatever reason, this gives a more reliable connection for the same SNR. Unclear why this is. Mike has suggested moving the sector to a different spot on the tower to see if that works better. |
||
− | Frequency: 5.99 GHz (Unlicensed use - [https://www.fcc.gov/document/fcc-opens-6-ghz-band-wi-fi-and-other-unlicensed-uses FCC note]) |
||
+ | ==== March 2024 ==== |
||
− | Bandwidth: 50 MHz |
||
+ | * Replaced Mikrotik CRS112-8P-4S-1N with Mikrotik RB5009UPr+S+in |
||
− | Antenna: Ubiquiti RD-5G30-LW 30 dBi |
||
+ | ==== January 2024 ==== |
||
− | Location: 37.68678, -122.43527 |
||
+ | * Replaced RAC-2's 90° sector with 120°sector. |
||
− | Altitude: 400m |
||
+ | ==== August 2023 ==== |
||
− | Bearing: 56° toward Oakland |
||
− | [[File:ToSanCarlos.jpg|thumb|200x200px]] |
||
+ | * Replace Rocket M5s with Rocket 5AC Lites |
||
− | === DISH-TO-SANCARLOS === |
||
− | Radio: UISP LTU Rocket |
||
+ | ==== July 2023 ==== |
||
− | Frequency: 5.935 GHz (Unlicensed use - [https://www.fcc.gov/document/fcc-opens-6-ghz-band-wi-fi-and-other-unlicensed-uses FCC note]) |
||
+ | * Switched airFiber radios to support multipoint radio at [[Fish Ranch]]. |
||
+ | ==== June 2023 ==== |
||
− | Bandwidth: 50 MHz |
||
+ | * Based on Mike's feedback from the May visit, rerouted all our cables from the "downspout" entry into the shack to the "gland" entry point. Now all our cables go in the official way. |
||
+ | * Rerouted the south cabling on the tower to follow and hide behind the tower beams (per Mike) to make the install much cleaner. |
||
+ | * Move the NUC11 ethernet cable to the switch to allow experimenting using the NUC to manage the backbone traffic. |
||
+ | * Installed the new rubber entry "thingy", rerouted cables through it, and trimmed and re-terminated. |
||
+ | * Installed new Mikrotik Router CRS112-8P-4S-IN |
||
+ | * Removed UISP Router and the rack shelf it was on. |
||
+ | ==== May 2023 ==== |
||
− | Antenna: Ubiquiti RD-5G30-LW 30 dBi |
||
+ | * Non-AREDN related work at the site, but also involved tidying up cabling for various devices, including some of AREDN's ethernet. |
||
+ | ==== April 2023 ==== |
||
− | Location: 37.68678, -122.43527 |
||
+ | * Added separate power backup system using EdgePower 24V with a 200Ah LiFePo4 battery. |
||
+ | * Added a NUC11 (minipc) to experiment with service hosting. Idle power draw is ~4W. NUC runs Proxmox to allow virtualization of services. |
||
+ | ==== March 2023 ==== |
||
− | Altitude: 400m |
||
+ | * Re-terminated the cable to KN6PLV-SANBRUNO-RM. Radio was replaced thinking the connector was broken, but looks like it was bad termination. Note that the cable to this radio is only single skinned rather than the double skinned burial grade we now use. |
||
+ | == Hosted Services == |
||
− | Bearing: 149° toward San Carlos |
||
+ | An on-site NUC11 running Proxmox provides locally hosted services. The platform was chosen for its low idle power consumption (4 watts) and flexibility. |
||
− | |||
− | Read Only Access: mesh / Back-Bone |
||
− | [[File:SanBrunoMtnHAP.jpg|thumb|200x200px]] |
||
− | |||
− | === KN6PLV-SANBRUNO-HAP === |
||
− | Radio: Mikrotik hAP |
||
+ | === Services === |
||
− | Antenna: Built-in (unused) |
||
+ | * Mesh Map |
||
− | Location: Inside the HAM Shack |
||
+ | * KN6PLV-SanBruno-VNode (virtualize AREDN node) |
||
+ | == Meshtastic == |
||
− | Altitude: 385m |
||
+ | A [[Meshtastic]] node '''KN6PLV-SanBrunoMtn''' is mounted above the radio KN6PLV-SANBRUNO-RM5. We plan to remove this node in the future. |
||
− | |||
− | Bearing: N/A |
||
− | [[File:San Bruno - RM5.jpg|thumb|200x200px|On axis view from antenna]] |
||
− | |||
− | === W2GMD-SANBRUNO-RM5 === |
||
− | Radio: Ubiquiti Rocket M5 |
||
− | |||
− | Antenna: 120 degree sector |
||
− | |||
− | Location: 37.68674, -122.43525 |
||
− | |||
− | Altitude: 387m |
||
− | |||
− | Bearing: 159° toward Millbrae |
||
− | [[File:San Bruno NSM5.jpg|thumb|200x200px|On axis view from antenna]] |
||
− | |||
− | === KN6PLV-SANBRUNO-RM5-2 === |
||
− | Radio: Ubiquiti Rocket M5 |
||
− | |||
− | Antenna: 90 degree sector |
||
− | |||
− | Location: 37.68673, -122.43532 |
||
− | |||
− | Altitude: 392m |
||
− | |||
− | Bearing: 236° toward Colma |
||
== Coordination == |
== Coordination == |
||
− | The San Bruno Mountain HAM site is own and managed by Matthew Kaufman as part of the WB6ECE Repeater Group. Coordination of changes to the site (e.g. new radios) is managed on the mailing list [http://lists.lns.com/pipermail/sbruno_shack/ Sbruno_shack]. Unfortunately this is an invite only group with no public archives. |
+ | The San Bruno Mountain HAM site is own and managed by Matthew Kaufman as part of the [[WB6ECE Repeater Group]]. Coordination of changes to the site (e.g. new radios) is managed on the mailing list [http://lists.lns.com/pipermail/sbruno_shack/ Sbruno_shack]. Unfortunately this is an invite only group with no public archives. |
== Commercial Neighbors == |
== Commercial Neighbors == |
||
Line 247: | Line 321: | ||
== Contacts == |
== Contacts == |
||
+ | === Site Admin === |
||
− | * Tim Wilkinson - KN6PLV - tim@sfwem.net |
||
* Steve Ligtelyn - KC6SVW - steve@tcomeng.com |
* Steve Ligtelyn - KC6SVW - steve@tcomeng.com |
||
* Matthew Kaufman - KA6SQG - matthew@eeph.com |
* Matthew Kaufman - KA6SQG - matthew@eeph.com |
||
+ | |||
+ | === Mesh Admin === |
||
+ | |||
+ | * Tim Wilkinson - KN6PLV - tim@sfwem.net |
Latest revision as of 09:28, 14 August 2024
Site located on San Bruno Mountain, next to Building 7, near the KTSF transmitter (map)(photos)
Nodes
KN6PLV-SANBRUNO-HAP
- Radio: Mikrotik hAP AC2
- Antenna: Built-in (provides onsite wifi access to mesh)
- Location: Inside the HAM Shack
- Altitude: 385m
- Bearing: N/A
KN6PLV-SANBRUNO-RAC5-1
- Radio: Ubiquiti Rocket 5AC Lite
- Antenna: 120° sector
- Location: 37.68674, -122.43525
- Altitude: 387m
- Bearing: 159° toward Millbrae
KN6PLV-SANBRUNO-RAC5-2
- Radio: Ubiquiti Rocket 5AC Lite
- Antenna: 120° sector
- Location: 37.68673, -122.43532
- Altitude: 392m
- Bearing: 207° toward Skyline College
KN6PLV-SANBRUNO-VNODE
- Radio: None
- Antenna: N/A
- Location: 37.68673, -122.43532
- Altitude: 392m
- Bearing: N/A
Backbone
Dish to Fish Ranch
- Radio: airFiber 5XHD
- Frequency: 6.025 GHz (FCC OET Experimental License WN2XRO)
- Bandwidth: 40 MHz
- Antenna: Ubiquiti RD-5G30-LW 30 dBi
- Location: 37.68678, -122.43527
- Altitude: 400m
- Bearing: 56° toward Oakland
Dish to San Carlos, Swallow, Fire Station 8 & Black Mountain (Site 4)
- Radio: UISP LTU Rocket
- Frequency: 5.965 GHz (GCC OET Experimental License WN2XUD)
- Bandwidth: 40 MHz
- Antenna: Ubiquiti RD-5G30-LW 30 dBi
- Location: 37.68678, -122.43527
- Altitude: 400m
- Bearing: 149° toward San Carlos
- Read Only Access: mesh / aredn-back-bone
Site Details
Tower
The tower has a 4° slope on the main lower beams. The base of the tower is approximately 23 feet wide. The first horizontal beam is 8 feet from the ground. The second beam is 7 feet above the first. The supporting angled beams, running from the group, are at an angle of 37° from vertical. The ham shack is located on the south side of the tower with a slight peeked roof. The top of the roof peek is 6 feet from the second beam. The edge of the roof is approximately level with the first beam.
The beams themselves are 3.5in horizontally, 3in vertically, and 0.25in thick with a rounded edge. The double beam which forms the second horizontal beam is 1.25in thick.
Mounting
All equipment must be mounded on galvanized supports which are themselves attached to the tower using beam clamps. All current mounting brackets should be considered unusable. Mounts using "stacked" struts are no longer allowed.
Cabling
Cabling must be run with beam camps and stainless steel zip ties and cannot be directly attached to the tower. Cables run into the shack via rubber cable glands (not the plastic tube!). Cable loops are discouraged, as is excessive cable in the shack.
Power
The site provide main power (without backup) as well as 24vdc, 12vdc and -24vdc (breakers not provided) with battery backup. No solar or generator.
Originally we used the provided backup 24vdc power, but switched to our own 200Ah battery (~2 days of power) to avoid negatively impacting the rest of the site's tenants.
Configuration
Currently the site has an Mikrotik hAP AC2, two Ubiquiti Rocket M5 + 120 degree sector antennas, a Ubiquiti UISP Router, two Ubiquiti AirFiber dish - one pointing at Fish Ranch, the other at San Carlos, and a NUC11 server. All device are power either directly, or via the router, from the our own EdgePower with backup battery.
Device | IP | Notes |
---|---|---|
MIkrotik Router CRS112-8P-4S-IN | DHCP | |
airFiber 5XHD | DHCP | to Fish Ranch, Management VLAN 100 |
UISP LTU Rocket | DHCP | to San Carlos, Management VLAN 100 |
NUC11 | 10.250.201.134 | NUC11ATKC4 + 32GB Memory + 512GB NVME |
EdgePower 24V | DHCP |
VLAN | Description |
---|---|
1 | AREDN WAN |
2 | AREDN DtD |
10 | Swallow XLINK |
13 | Fish Ranch XLINK |
15 | San Carlos XLINK |
100 | AREDN LAN |
911 | Emergency local management |
Port | Description | VLANs | PoE | Notes |
---|---|---|---|---|
1 | KN6PLV-SANBRUNO-RM5 | 2 | 24v | |
2 | KN6PLV-SANBRUNO-RM5-2 | 2 | 24v | |
3 | KN6PLV-SanBrunoMtn | (100) | 24v | Meshtastic node |
4 | Off | |||
5 | Off | |||
6 | Off | |||
7 | DISH-TO-FISHRANCH | 13, 100 | 24v | |
8 | DISH-TO-SANCARLOS | 10, 15, 16, 100 | 24v | |
sfp9 | - | |||
sfp10 | - | |||
sfp11 | KN6PLV-SANBRUNO-HAP | 2, (100) | - | hAP provides DHCP address to non-AREDN devices |
sfp12 | KN6PLV-SANBRUNO-SRV | 2, 10, 13, 15, 16, (100) | - |
Port | Description | VLANs | Notes |
---|---|---|---|
1 | to EdgePower 24V | (U) | Reconfigured as a "LAN" port to access the EdgePower which also provides PoE |
2 | |||
3 | (U) | ||
4 | (U) | ||
5 | KN6PLV-SANBRUNO-ROUTER | (U), 2 | Provides DHCP addresses to LAN devices |
Notes
Part of the Bay Area Backbone connecting to Fish Ranch, San Carlos and Swallow.
New Mounts
New mounts have been design using a 2" galvanized pipe attached to galvanized struts using pipe clamps. The struts are in turn attached to the tower using beam camps. The design can be found here.
All our equipment is mounted on two of these new mounts.
Future Plans
No current plans.
Completed Work
August 2024
- Adjusted azimuth of RAC-1 to provide a better connection to City Hall in San Bruno. From the map, the sector is no longer centered on City Hall (it was before) but for whatever reason, this gives a more reliable connection for the same SNR. Unclear why this is. Mike has suggested moving the sector to a different spot on the tower to see if that works better.
March 2024
- Replaced Mikrotik CRS112-8P-4S-1N with Mikrotik RB5009UPr+S+in
January 2024
- Replaced RAC-2's 90° sector with 120°sector.
August 2023
- Replace Rocket M5s with Rocket 5AC Lites
July 2023
- Switched airFiber radios to support multipoint radio at Fish Ranch.
June 2023
- Based on Mike's feedback from the May visit, rerouted all our cables from the "downspout" entry into the shack to the "gland" entry point. Now all our cables go in the official way.
- Rerouted the south cabling on the tower to follow and hide behind the tower beams (per Mike) to make the install much cleaner.
- Move the NUC11 ethernet cable to the switch to allow experimenting using the NUC to manage the backbone traffic.
- Installed the new rubber entry "thingy", rerouted cables through it, and trimmed and re-terminated.
- Installed new Mikrotik Router CRS112-8P-4S-IN
- Removed UISP Router and the rack shelf it was on.
May 2023
- Non-AREDN related work at the site, but also involved tidying up cabling for various devices, including some of AREDN's ethernet.
April 2023
- Added separate power backup system using EdgePower 24V with a 200Ah LiFePo4 battery.
- Added a NUC11 (minipc) to experiment with service hosting. Idle power draw is ~4W. NUC runs Proxmox to allow virtualization of services.
March 2023
- Re-terminated the cable to KN6PLV-SANBRUNO-RM. Radio was replaced thinking the connector was broken, but looks like it was bad termination. Note that the cable to this radio is only single skinned rather than the double skinned burial grade we now use.
Hosted Services
An on-site NUC11 running Proxmox provides locally hosted services. The platform was chosen for its low idle power consumption (4 watts) and flexibility.
Services
- Mesh Map
- KN6PLV-SanBruno-VNode (virtualize AREDN node)
Meshtastic
A Meshtastic node KN6PLV-SanBrunoMtn is mounted above the radio KN6PLV-SANBRUNO-RM5. We plan to remove this node in the future.
Coordination
The San Bruno Mountain HAM site is own and managed by Matthew Kaufman as part of the WB6ECE Repeater Group. Coordination of changes to the site (e.g. new radios) is managed on the mailing list Sbruno_shack. Unfortunately this is an invite only group with no public archives.
Commercial Neighbors
The local WISP in this area is Etheric although they use a different tower. They license (WQTV709) spectrum from 11.2 GHz to 11.7 GHz.
Contacts
Site Admin
- Steve Ligtelyn - KC6SVW - steve@tcomeng.com
- Matthew Kaufman - KA6SQG - matthew@eeph.com
Mesh Admin
- Tim Wilkinson - KN6PLV - tim@sfwem.net