Hurricane Electric FMT2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (3 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
Part of the [[Bay Area Backbone]]. |
Part of the [[Bay Area Backbone]]. |
||
| + | == Configuration == |
||
| ⚫ | |||
| + | All current information for this site can be found in [[Netbox|NetBox]]. |
||
| + | |||
| ⚫ | |||
| + | |||
| + | == Historic == |
||
| + | The information below is out of date. |
||
== Nodes == |
== Nodes == |
||
Latest revision as of 18:01, 8 December 2024
Hurricane Electric is located at 48233 Warm Springs Blvd, Fremont, CA 94539 (map)(photos).
Part of the Bay Area Backbone.
Configuration
All current information for this site can be found in NetBox.
https://netbox.bayareabackbone.com/dcim/sites/1/
Historic
The information below is out of date.
Nodes
KN6PLV-HE-VERA
- Radio: Proxmox
- Antenna: -
- Location: 37.4718, -121.9201
- Altitude: -
- Bearing: -
- Notes: Node is virtualized
KN6PLV-BAM-SUPERNODE
- Radio: Proxmox
- Antenna: -
- Location: 37.4718, -121.9201
- Altitude: -
- Bearing: -
- Notes: Node is virtualized
Backbone
Dish to Mount Allison
- Radio: Mimosa B11
- Link Name: hurricane-to-allison
- Frequency: 10.010 GHz & 10.030 GHz
- Bandwidth: 2x 20 MHz
- Mode: AP
- Antenna: 34 dBi dish - Jirous JRMC-680-10/11
- Location: 37.4718, -121.9201
- Altitude: 14m
- Bearing: 53°
Site Details
Hurricane Electric Fremont 2 is a 208,000 square foot colocation facility located in the heart of Silicon Valley with easy access from two major freeways (880, 680). Three international airports (SJC, OAK, SFO) are a short distance away. Their Fremont 1 Colocation Facility is located 1.5 miles north (edited from their website).
More information can be found on their website.
Colocation
Cabinet
- Cabinet: fmt2.1500.06.51
- CE Number: ce4794
- Power Type: 20A, 208V, single-phase
Router
- Manufacturer: Mikrotik
- Model: RB5009UPr+S+
Switch
- Manufacturer: Mikrotik
- Model: CRS309-1G-8S+IN
Server
- Manufacturer: Intel
- Model: NUC11ATKC4 16GB+512GB
- OS: Proxmox
Port Configurations
| VLAN | Description |
|---|---|
| 2 | AREDN DtD |
| 10 | AREDN LAN |
| 11 | AREDN WAN |
| 408 | bam-uisp @ 206.197.44.8 |
| 409 | websites proxy @ 206.197.44.9 |
| 410 | aredn-supernode @ 206.197.44.10 |
| 1101 | xlink & OSPF networks |
| 4001 | Switch management |
| 4002 | Switch sfp+2 port |
| 4003 | Switch sfp+3 port |
| 4004 | Switch sfp+4 port |
| 4005 | FREMIX (switch sfp+5 port) |
| 4006 | ARIX (switch sfp+6 port) |
| 4007 | FCIX (switch sfp+7 port) |
| 4008 | Hurricane Electric (switch sfp+8 port) |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| sfp+ | to Switch | 4001,4002,4003,4004,4005,4006,4007,4008 | - | 10G DAC connection to switch |
| 2.5g | no | |||
| 2 | no | |||
| 3 | no | |||
| 4 | no | |||
| 5 | no | |||
| 6 | Proxmox Server | (U), 408, 409, 410,1101 | no | |
| 7 | KVM | 48v | ||
| 8 | 10 GHz dish | 1101 | 48v |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| sfp+1 | to Router | 4001,4002,4003,4004,4005,4006,4007,4008 | - | 10G DAC connection to router |
| sfp+2 | (4002) | - | ||
| sfp+3 | (4003) | - | ||
| sfp+4 | (4004) | - | ||
| sfp+5 | FREMIX | (4005) | - | 10G |
| sfp+6 | ARIX | (4006) | - | 1G |
| sfp+7 | FCIX | (4007) | - | 10G |
| sfp+8 | Hurricane Electric | (4008) | - | 1G: Transit provider |
| eth | - |
Transit Information
This site provides a peering point between the Backbone and the more general Internet.
- IPv4 Peer
- BAM: 65.49.70.251/31
- HE: 65.49.70.250/31
- Network: 65.49.70.250/31
- IPv6 Peer
- BAM: 2001:470:253::2/126
HE: 2001:470:253::1/126
- Network: 2001:470:253::1/126
Future Plans
None
Completed Work
April 2024
- Re-adjust antenna once Mount Allison dish is installed.
- Replace missing radio bolt.
March 2024 / 2
- Adjust dish positioning to improve SNR.
March 2024 / 1
- Replace Mimosa power solution with injector + power controller (ezOutlet5)
- The B11 radio required more power (just occasionally) than the router could provide, causing resets.
February 2024
- Adjusted and raised dish to try to get connection to Fire Station 8, but failed. Looks like the landfill is just too high now.
- Repointed dish at Mount Allison for alternate path.
- Observer 10GHz beacon at Mt Allison on radio's spectrum analyzer
January 2024 / 3
- Added 10 GHz Mimosa dish on roof, pointing at Fire Station 8
- Connection could not be made. The other end is not yet aligned. It's also possible the link is non-viable as the "tip" near the Bay may be too high now and obstructing.
January 2024 / 2
- Installed KVM
- Labelled newly installed cables
- Terminated and installed roof ethernet
- Cable has been pulled to the roof by HE.
January 2024 / 1
- Installed 1G and 10G optics for later use
December 2023 / 3
- Setup peering with ARIX on 1G optics
December 2023 / 2
- Installed new PDU
- Removed Media Converter
- Installed Mikrotik CRS309-1G-8S+IN Switch to support multiple incoming fibers
- Configured BGP
- Configured OSPF
- Configured Wireguard to Oxford as temporary link until dish installed
- Switched FCIX optics to 10G
- Installed HE fiber in 1G optics on switch
December 2023 / 1
- Installed Router
- Installed Proxmox Server
- Installed SFP Media Converter
- Attached HE fiber to Router
Contacts
Site Admin
- Tim Wilkinson - KN6PLV - tim@bayareamesh.us
Mesh Admin
- Tim Wilkinson - KN6PLV - tim@bayareamesh.us