Fish Ranch: Difference between revisions
No edit summary |
|||
| Line 63: | Line 63: | ||
|26 |
|26 |
||
|K6MPP-INTERNET 192.168.0.0/24 |
|K6MPP-INTERNET 192.168.0.0/24 |
||
| − | |} |
||
| − | {| class="wikitable" |
||
| − | |+Juniper Switch |
||
| − | !Port |
||
| − | !Description |
||
| − | !VLANs |
||
| − | !Notes |
||
| − | |- |
||
| − | |1 |
||
| − | |AREDN [https://store.ui.com/collections/operator-airmax-and-ltu-accessories/products/nanoswitch NanoSwitch] on Tower |
||
| − | |1,2,(3) |
||
| − | |Yellow cable -> PINJ -> Black cable |
||
| − | |- |
||
| − | |2 |
||
| − | |KPFA Studio |
||
| − | |(4) |
||
| − | |Blue cable |
||
| − | |- |
||
| − | |3 |
||
| − | |(unused) |
||
| − | |(2) |
||
| − | | |
||
| − | |- |
||
| − | |4 |
||
| − | |[[San Bruno Mountain|San Bruno]] Dish |
||
| − | |4 |
||
| − | |airFiber. Black cable -> PINJ -> Black cable + Yellow tape |
||
| − | |- |
||
| − | |5 |
||
| − | |(unused) |
||
| − | |(2) |
||
| − | | |
||
| − | |- |
||
| − | |6 |
||
| − | |Router / Eth1 |
||
| − | |(4) |
||
| − | |White cable |
||
| − | |- |
||
| − | |7 |
||
| − | |(unused) |
||
| − | |(2) |
||
| − | | |
||
| − | |- |
||
| − | |8 |
||
| − | |(unused) |
||
| − | |(4) |
||
| − | | |
||
| − | |- |
||
| − | |9 |
||
| − | |Router / Eth2 |
||
| − | |(25) |
||
| − | |Yellow cable |
||
| − | |- |
||
| − | |10 |
||
| − | |Router / Eth0 |
||
| − | |(26) |
||
| − | |Blue cable |
||
| − | |- |
||
| − | |11 |
||
| − | |K6MPP |
||
| − | |25, (26) |
||
| − | |airFiber 60 LR. Red cable -> PINJ -> Black cable + Blue tape |
||
| − | |- |
||
| − | |12 |
||
| − | |ORCA |
||
| − | |1, 2, 3, 4, 25 |
||
| − | |White cable -> PINJ -> Black cable |
||
|} |
|} |
||
{| class="wikitable" |
{| class="wikitable" |
||
| Line 153: | Line 86: | ||
|Yellow cable |
|Yellow cable |
||
|} |
|} |
||
| − | |||
| − | === Configuration (proposed) === |
||
| − | Replace Juniper switch with [https://store.ui.com/collections/operator-edgemax-switches/products/edgeswitch-8-150w Edge Switch 8]. |
||
{| class="wikitable" |
{| class="wikitable" |
||
|+Edge Switch 8 |
|+Edge Switch 8 |
||
| Line 236: | Line 166: | ||
* Enable LAN device support on KJ6WEG-OAK-FishRanch-PBM5 |
* Enable LAN device support on KJ6WEG-OAK-FishRanch-PBM5 |
||
| ⚫ | |||
| − | * Swap the Juniper switch for the new EdgeSwitch |
||
| − | ** Setup LAN access for management |
||
| − | * Remove power injects which are no longer required |
||
| ⚫ | |||
** Setup LAN access for management |
** Setup LAN access for management |
||
| − | * Install backup power (battery + solar) |
||
==Nodes== |
==Nodes== |
||
Revision as of 14:13, 3 September 2022
Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)
Site Details
Configuration
Fish Ranch currently hosts an Juniper EX2300-C switch and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).
Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex). Problems with connection reliability were fixed by removing some tree branches (July 22nd, 2022).
| Device | IP | Notes |
|---|---|---|
| Juniper Switch EX2300-C | 192.168.100.12 | |
| EdgeMax EdgeRouter 4 | 192.168.100.9 | |
| Mikrotik Wireless Wire RBwAPG-60ad | to ORCA | |
| airFiber 60 LR | 192.168.100.11 | to K6MPP |
| airFiber 5XHD | 44.4.59.44 | VLAN 4, 5990 / 60 MHz to San Bruno Mtn |
| EdgeSwitch8 | 192.168.100.25 | VLAN 25 |
| VLAN | Description |
|---|---|
| 1 | AREDN WAN |
| 2 | AREDN DtD |
| 3 | AREDN LAN |
| 4 | AMPRNET 44.4.59.0/24 |
| 5 | MultiWAN |
| 25 | Management |
| 26 | K6MPP-INTERNET 192.168.0.0/24 |
| Port | Description | VLANs | Notes |
|---|---|---|---|
| Eth0 | K6MPP-INTERNET | - | Blue cable |
| Eth1 | AMPRNET 44.4.59.0/24 | - | White cable |
| Eth2 | Management | - | Yellow cable |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| 1 | AREDN NanoSwitch on Tower | 1, 2, (3) | Passive | Black cable (unknown markings) |
| 2 | San Bruno Dish | 2, 4, 5, 25 | Passive | Black cable + Yellow tape
Add VLAN 5 to Dish to use multi-wan in future. Add VLAN 2 (DtD) and VLAN 25 (Management) to Dish. |
| 3 | KPFA Studio | (4) | Off | Blue cable |
| 4 | Router / Eth0 - K6MPP | (26) | Off | Blue cable |
| 5 | Router / Eth1 - AMPRNET | (4) | Off | White cable |
| 6 | Router / Eth2 - Management | (25) | Off | Yellow cable |
| 7 | K6MPP | (26) | Passive | airFiber 60 LR, Black cable + blue tape |
| 8 | ORCA | 2, 4, 5, 25 | 802.3af/at | Black cable (unknown markings) |
| 9 | Management | 1, 2, 3, 4, 5, (25), 26 | - | + access to all VLANs |
| 10 | Internet | (4) | - |
Assumes we make no changes to the current Router setup.
Notes
Part of the Bay Area Backbone.
Plans
- Enable LAN device support on KJ6WEG-OAK-FishRanch-PBM5
- San Bruno Dish
- Setup LAN access for management
Nodes
DISH-TO-SANBRUNO
Radio: Ubiquiti airFiber 5XHD
Frequency: 5.99 GHz (Unlicensed use - FCC note)
Bandwidth: 60 MHz
Antenna: Ubiquiti airFiber 5G23-S45 23 dBi
Location: 37.865191, -122.221158
Altitude: 466m
Bearing: -
KJ6WEG-OAK-FishRanch-SectorM5
Radio: Ubiquiti Rocket M5 XW
Antenna: 120° Sector, 19 dBi
Location: -
Altitude: -
Bearing: Pointing towards Oakland flats
KJ6WEG-OAK-FishRanch-PBM5
Radio: Ubiquiti PowerBeam M5 400-ISO
Antenna: 25 dBi (built-in)
Location: -
Altitude: -
Bearing: -
Contacts
- Christiaan Adams - KJ6WEG - csadams@gmail.com