San Carlos: Difference between revisions
Jump to navigation
Jump to search
m (→Configuration) |
m (→Notes) |
||
| Line 190: | Line 190: | ||
*Add the EdgeRouterX |
*Add the EdgeRouterX |
||
*Add the airFiber link to San Bruno |
*Add the airFiber link to San Bruno |
||
| + | *Remove hAP if we need the space (hopefully it can stay!) |
||
| − | *Remove hAP |
||
==Nodes== |
==Nodes== |
||
Revision as of 13:48, 8 September 2022
A privately owned site in the hills with a view of San Carlos and surrounding area (map)
Site Details
Configuration
San Carlos hosts an Edge Router X SFP, an EdgePower 24V 72W, three NanoSwitches, and is battery backed up. This location also has emergency backup power.
| Device | IP | Notes |
|---|---|---|
| EdgeRouterX | AREDN LAN | Management on VLAN 1001 |
| EdgePower 24V 72W | AREDN LAN | |
| airFiber 5XHD | AREDN LAN | Management on VLAN 1001 |
| VLAN | Description |
|---|---|
| 1 | AREDN WAN |
| 2 | AREDN DtD |
| 1001 | Management |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| 0 | airFiber 5XHD | 2, 1001 | 24v | to San Bruno Mountain |
| 1 | airFiber 5XHD | 2, 1001 | 24v | (not yet) |
| 2 | AREDN | 1, 2, (1001) | 24v | Access point |
| 3 | AREDN | 1, 2, (1001) | Off | |
| 4 | AREDN | 1, 2, (1001) | Off | |
| 5 | AREDN | 1, 2, (1001) | - |
| Port | Description | VLAN | Notes |
|---|---|---|---|
| Data | Management VLAN 1001 | ||
| Mgmt | (unused) |
| Port | Description | PoE | Notes |
|---|---|---|---|
| 1 | to hAP Lan port | Off | (guess) |
| 2 | (unused) | Off |
| Port | Description | Notes |
|---|---|---|
| PoE In | from hAP DtD Port | Cable runs via a 24v injectors powered by the EdgePower |
| Poe Out 1 | AJ6VV-SC-LHG-XL-1-003 | |
| PoE Out 2 | AJ6VV-SC-90SECT-345 | (guess) |
| PoE Out 3 | to NanoSwitch 2 PoE In |
| Port | Description | Notes |
|---|---|---|
| PoE In | from NanoSwitch 2 PoE Out 1 | |
| Poe Out 1 | AJ6VV-SC-90SECT-26-175 | (guess) |
| PoE Out 2 | (unused) | |
| PoE Out 3 | to NanoSwitch 3 PoE In |
| Port | Description | Notes |
|---|---|---|
| PoE In | from NanoSwitch 2 PoE Out 3 | |
| Poe Out 1 | AJ6VV-SC-90SECT-86 | (guess) |
| PoE Out 2 | AJ6VV-SC-LHG300-91 | |
| PoE Out 3 | (unused) |
Notes
The airFiber and EdgeRouterX are not yet installed.
Plans
- Add the EdgeRouterX
- Add the airFiber link to San Bruno
- Remove hAP if we need the space (hopefully it can stay!)
Nodes
AJ6VV-SC-hAP1
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing:
AJ6VV-SC-90SECT-26-175
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing:
AJ6VV-SC-90SECT-86
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing:
AJ6VV-SC-LHG-XL-1-003
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing:
AJ6VV-SC-90SECT-345
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing:
AJ6VV-SC-LHG300-91
Radio:
Frequency:
Bandwidth:
Antenna:
Location:
Altitude:
Bearing: