BAM Weekly Working Group June 12th, 2023: Difference between revisions

From Bay Area Mesh
Jump to navigation Jump to search
(Created page with "=== Attendees === * Dave Dornlas * Jim Moss * Tim Wilkinson * Mathison Ott * Chris Adams === Notes by === * Tim Wilkinson === Major Discussions Topics === * Black Mountain ** Jim continues to work on debugging the problems at Black Mountain. ** Discussion that at some point it might be useful to take a bunch of equipment out into the desert to do some non-interference, distance testing between nodes (Mathison has always wanted to do this). * Jim ** Giving a presenta...")
 
 
Line 22: Line 22:
 
* Winlink
 
* Winlink
 
** Dave is working on a Winlink system, but progress and debugging on the non-Window software is slow going.
 
** Dave is working on a Winlink system, but progress and debugging on the non-Window software is slow going.
  +
* San Bruno Mtn
  +
** Tim plans to go up on Tuesday to reroute all the cabling into the shack to a more preferred entry point. He'll also cut and re-terminate as the cables are far too long.

Latest revision as of 16:41, 17 June 2023

Attendees

  • Dave Dornlas
  • Jim Moss
  • Tim Wilkinson
  • Mathison Ott
  • Chris Adams

Notes by

  • Tim Wilkinson

Major Discussions Topics

  • Black Mountain
    • Jim continues to work on debugging the problems at Black Mountain.
    • Discussion that at some point it might be useful to take a bunch of equipment out into the desert to do some non-interference, distance testing between nodes (Mathison has always wanted to do this).
  • Jim
    • Giving a presentation on AREDN in the South Bay on Tuesday
    • Tim will help him configure the new switch for Black next week
    • Invited to Allison to see what we can/cannot arrange there
  • Winlink
    • Dave is working on a Winlink system, but progress and debugging on the non-Window software is slow going.
  • San Bruno Mtn
    • Tim plans to go up on Tuesday to reroute all the cabling into the shack to a more preferred entry point. He'll also cut and re-terminate as the cables are far too long.