Fish Ranch: Difference between revisions
Jump to navigation
Jump to search
m (→Configuration) |
|||
| Line 23: | Line 23: | ||
|- |
|- |
||
|4 |
|4 |
||
| − | | |
+ | |AMPRNET 44.4.59.0 |
|- |
|- |
||
|5 |
|5 |
||
| Line 114: | Line 114: | ||
|- |
|- |
||
|Eth1 |
|Eth1 |
||
| − | | |
+ | |AMPRNET 44.4.59.0 |
| - |
| - |
||
|White cable |
|White cable |
||
| Line 159: | Line 159: | ||
|- |
|- |
||
|4 |
|4 |
||
| − | |Router / Eth0 |
+ | |Router / Eth0 - K6MPP |
|(26) |
|(26) |
||
|Off |
|Off |
||
| Line 165: | Line 165: | ||
|- |
|- |
||
|5 |
|5 |
||
| − | |Router / Eth1 |
+ | |Router / Eth1 - AMPRNET |
|(4) |
|(4) |
||
|Off |
|Off |
||
| Line 171: | Line 171: | ||
|- |
|- |
||
|6 |
|6 |
||
| − | |Router / Eth2 |
+ | |Router / Eth2 - Management |
|(25) |
|(25) |
||
|Off |
|Off |
||
Revision as of 18:17, 24 July 2022
Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)
Site Details
Configuration
Fish Ranch currently hosts an Juniper EX2300-C switch and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).
Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex). Problems with connection reliability were fixed by removing some tree branches (July 22nd, 2022).
| VLAN | Description |
|---|---|
| 1 | AREDN WAN |
| 2 | AREDN DtD |
| 3 | AREDN LAN |
| 4 | AMPRNET 44.4.59.0 |
| 5 | (Proposed MultiWAN) |
| 25 | MGMT |
| 26 | K6MPP-INTERNET |
| Port | Description | VLANs | Notes |
|---|---|---|---|
| 1 | AREDN NanoSwitch on Tower | 1,2,(3) | Yellow cable -> PINJ -> Black cable |
| 2 | KPFA Studio | (4) | Blue cable |
| 3 | (unused) | (2) | |
| 4 | San Bruno Dish | 4 | airFiber. Black cable -> PINJ -> Black cable + Yellow tape |
| 5 | (unused) | (2) | |
| 6 | Router / Eth1 | (4) | White cable |
| 7 | (unused) | (2) | |
| 8 | (unused) | (4) | |
| 9 | Router / Eth2 | (25) | Yellow cable |
| 10 | Router / Eth0 | (26) | Blue cable |
| 11 | K6MPP | 25, (26) | airFiber 60 LR. Red cable -> PINJ -> Black cable + Blue tape |
| 12 | ORCA | 1, 2, 3, 4, 25 | White cable -> PINJ -> Black cable |
| Port | Description | VLANs | Notes |
|---|---|---|---|
| Eth0 | K6MPP-INTERNET | - | Blue cable |
| Eth1 | AMPRNET 44.4.59.0 | - | White cable |
| Eth2 | Management | - | Yellow cable |
Other equipment
- 192.168.100.10/24 - airFiber 60 LR to K6MPP
- 192.168.100.11/24 - airFiber 60 LR to KPFA Bldg
Configuration (proposed)
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| 1 | AREDN NanoSwitch on Tower | 1, 2, (3) | Passive | Black cable (unknown markings) |
| 2 | San Bruno Dish | 2, 5, 25 | Passive | Black cable + Yellow tape
Switch VLAN 4 to 5 to use multi-wan. Add VLAN 2 (DtD) and VLAN 25 (Management). |
| 3 | KPFA Studio | (4) | Off | Blue cable |
| 4 | Router / Eth0 - K6MPP | (26) | Off | Blue cable |
| 5 | Router / Eth1 - AMPRNET | (4) | Off | White cable |
| 6 | Router / Eth2 - Management | (25) | Off | Yellow cable |
| 7 | K6MPP | 25, (26) | Passive | airFiber 60 LR, Black cable + blue tape |
| 8 | ORCA | 2, 4, 5, 25 | 802.3af/at | Black cable (unknown markings) |
| 9 | Management | (25) | - | |
| 10 | Internet | (4) | - |
Assumes we make no changes to the current Router setup.
Notes
Part of the Bay Area Backbone.
Plans
See ORCA
Nodes
- KJ6WEG-OAK-FishRanch-SectorM5
- KJ6WEG-OAK-FishRanch-PBM5
Contacts
- Christiaan Adams - KJ6WEG - csadams@gmail.com