Backbone Site Hardware

From Bay Area Mesh
Revision as of 11:05, 7 November 2023 by Kn6plv (talk | contribs) (Created page with "The image belows illustrates the basic hardware we would install at a backbone site. thumb|none|600x600px This consists of the following components: * An [https://dl.ubnt.com/datasheets/edgemax/EdgeRouter_X_DS.pdf Ubiquiti EdgeRouter X SFP] which supports the backbone routing protocols, as well as providing power-over-ethernet to the other components * A [https://mikrotik.com/product/hap_ac2 Mikrotik hAP ac<sup>2</sup>] which provides A...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The image belows illustrates the basic hardware we would install at a backbone site.

TypicalSiteHardware.jpg

This consists of the following components:

  • An Ubiquiti EdgeRouter X SFP which supports the backbone routing protocols, as well as providing power-over-ethernet to the other components
  • A Mikrotik hAP ac2 which provides AREDN services at the site
  • An Ubiquiti airFiber radio which connects this site to others in the network
  • A 19" rack shelf to install the hardware on.
  • 24v power input, either from an AC/DC converter, or from a battery backup supply (not shown here)
Retrieved from "https://wiki.bayareamesh.us/index.php?title=Backbone_Site_Hardware&oldid=2434"