Hurricane Electric FMT2

From Bay Area Mesh
Revision as of 15:06, 6 January 2024 by Kn6plv (talk | contribs) (→‎Backbone)
Jump to navigation Jump to search
Hurricane Electric Colocation Facility Fremont2.jpg

he.net

Hurricane Electric is located at 48233 Warm Springs Blvd, Fremont, CA 94539 (map).

Part of the Bay Area Backbone.

Nodes

KN6PLV-HE-VERA

  • Radio: VM
  • Antenna: n/a
  • Location: 37.4718, -121.9201
  • Altitude: n/a
  • Bearing: n/a
  • Notes:

Backbone

HE-to-FS8.jpg

Dish to Fire Station 8

  • Radio: Mimosa B11
  • Link Name: fs8-to-hurricane
  • Frequency: 10.010 GHz & 10.030 GHz
  • Bandwidth: 2x 20 MHz
  • Mode: CPE
  • Antenna: 34 dBi dish - Jirous JRMC-680-10/11
  • Location: 37.4718, -121.9201
  • Altitude: 19m
  • Bearing: 243°

Site Details

Hurricane Electric Fremont 2 is a 208,000 square foot colocation facility located in the heart of Silicon Valley with easy access from two major freeways (880, 680). Three international airports (SJC, OAK, SFO) are a short distance away. Their Fremont 1 Colocation Facility is located 1.5 miles north (edited from their website).

More information can be found on their website.

Colocation

Cabinet

  • Cabinet: fmt2.1500.06.51
  • CE Number: ce4794
  • Power Type: 20A, 208V, single-phase

Router

  • Manufacturer: Mikrotik
  • Model: RB5009UPr+S+

Switch

Server

  • Manufacturer: Intel
  • Model: NUC11ATKC4 16GB+512GB
  • OS: Proxmox

Transit Information

This site provides a peering point between the Backbone and the more general Internet.

  • IPv4 Peer
    • BAM: 65.49.70.251/31
    • HE: 65.49.70.250/31
    • Network: 65.49.70.250/31
  • IPv6 Peer
    • BAM: 2001:470:253::2/126
    • HE: 2001:470:253::1/126
    • Network: 2001:470:253::1/126

Future Plans

  • Add 10 GHz Mimosa dish on roof, pointing at Fire Station 8
    • Cable shipped to facility (arriving Friday 12th Jan)
    • Dish install scheduled week of 14th Jan (weather permitting)
  • Install KVM for console access to Proxmox server.
  • Add cross connect to FCIX.

Completed Work

December 2023 / 3

  • Setup peering with ARIX on 1G optics

December 2023 / 2

  • Installed new PDU
  • Removed Media Converter
  • Installed Mikrotik CRS309-1G-8S+IN Switch to support multiple incoming fibers
  • Configured BGP
  • Configured OSPF
  • Configured Wireguard to Oxford as temporary link until dish installed
  • Switched FCIX optics to 10G
  • Installed HE fiber in 1G optics on switch

December 2023 / 1

  • Installed Router
  • Installed Proxmox Server
  • Installed SFP Media Converter
  • Attached HE fiber to Router

Contacts

Site Admin

  • Tim Wilkinson - KN6PLV - tim@bayareamesh.us

Mesh Admin

  • Tim Wilkinson - KN6PLV - tim@bayareamesh.us