Fish Ranch: Difference between revisions
(→Plans) |
mNo edit summary |
||
| Line 57: | Line 57: | ||
|5 |
|5 |
||
|MultiWAN |
|MultiWAN |
||
| + | |- |
||
| + | |12 |
||
| + | |ORCA XLINK |
||
|- |
|- |
||
|13 |
|13 |
||
Revision as of 17:58, 23 January 2023
Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)
Site Details
Configuration
Fish Ranch currently hosts an EdgeSwitch8, and EdgePower 54V 72W and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).
Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex)
| Device | IP | Notes |
|---|---|---|
| EdgeMax EdgeRouter 4 | 192.168.100.9 | |
| Mikrotik Wireless Wire RBwAPG-60ad | to ORCA | |
| airFiber 60 LR | 192.168.100.11 | to K6MPP |
| airFiber 5XHD | AREDN LAN | to San Bruno Mtn |
| EdgeSwitch8 | 192.168.100.25 | VLAN 25 |
| EdgePower 24V | Not yet connected to network (3 Sept 2022) |
| VLAN | Description |
|---|---|
| 1 | AREDN WAN |
| 2 | AREDN DtD |
| 3 | AREDN LAN |
| 4 | AMPRNET 44.4.59.0/24 |
| 5 | MultiWAN |
| 12 | ORCA XLINK |
| 13 | San Bruno Mtn XLINK |
| 25 | Management |
| 26 | K6MPP-INTERNET 192.168.0.0/24 |
| Port | Description | VLANs | Notes |
|---|---|---|---|
| Eth0 | K6MPP-INTERNET | - | Blue cable |
| Eth1 | AMPRNET 44.4.59.0/24 | - | White cable |
| Eth2 | Management | - | Yellow cable |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| 1 | EdgeSwitch8 Port 1 | - | Off | TO DO |
| 2 | AREDN NanoSwitch on Tower | - | 24V | TO DO |
| Port | Description | VLANs | PoE | Notes |
|---|---|---|---|---|
| 1 | AREDN NanoSwitch on Tower | 1, 2, (3) | 24V | Black cable (unknown markings) |
| 2 | San Bruno Dish | 2, (3), 4, 5, 13, 25 | 24V | Black cable + Yellow tape |
| 3 | KPFA Studio | (4) | Off | Blue cable |
| 4 | Router / Eth0 - K6MPP | (26) | Off | Blue cable |
| 5 | Router / Eth1 - AMPRNET | (4) | Off | White cable |
| 6 | Router / Eth2 - Management | (25) | Off | Yellow cable |
| 7 | K6MPP | (26) | 24V | airFiber 60 LR, Black cable + blue tape |
| 8 | ORCA | 2, 4, 5, 25 | 802.3af/at | Black cable (unknown markings) |
| 9 | Management | 1, 2, 3, 4, 5, 13, (25), 26 | - | + access to all VLANs |
| 10 | Internet | (4) | - |
Plans (proposed)
- Add HAP AC2
- Attach EdgePower for monitoring and to provide power to HAP
- Attach EdgeSwitch
- Provides extra port (e.g. for John Cornell)
- Replace San Bruno Mtn radio
- Replace current radio (only radio) with an LTU model to we have the future option to light up Building 4 with the same dish.
Backbone
Dish to San Bruno
Radio: Ubiquiti airFiber 5XHD
Frequency: 5.99 GHz (Unlicensed use - FCC note)
Bandwidth: 60 MHz
Antenna: Ubiquiti RD-5G30-LW 30 dBi
Location: 37.865191, -122.221158
Altitude: 466m
Bearing: -
Nodes
KJ6WEG-OAK-FishRanch-SectorM5
Radio: Ubiquiti Rocket M5 XW
Antenna: 120° Sector, 19 dBi
Location: -
Altitude: 455m
Bearing: Pointing towards Oakland flats
KJ6WEG-OAK-FishRanch-PBM5
Radio: Ubiquiti PowerBeam M5 400-ISO
Antenna: 25 dBi (built-in)
Location: -
Altitude: 455m
Bearing: -
Contacts
- Christiaan Adams - KJ6WEG - csadams@gmail.com