Fish Ranch: Difference between revisions

From Bay Area Mesh
Jump to navigation Jump to search
mNo edit summary
Line 182: Line 182:
 
=== Plans (proposed) ===
 
=== Plans (proposed) ===
   
* hAP AC2
 
** Insert Ubiquiti Instant PoE inline so we can power the hAP from the EdgePower rather than a separate power brick.
 
 
* Replace San Bruno Mtn radio
 
* Replace San Bruno Mtn radio
 
** Replace current radio (only radio) with an LTU model to we have the future option to light up [[San Bruno Mountain (Building 4)|Building 4]] with the same dish.
 
** Replace current radio (only radio) with an LTU model to we have the future option to light up [[San Bruno Mountain (Building 4)|Building 4]] with the same dish.

Revision as of 15:38, 20 February 2023

View south from Fish Ranch

Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)

Site Details

Configuration

Fish Ranch currently hosts an EdgeSwitch8, and EdgePower 54V 72W and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).

Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex)

Devices
Device IP Notes
EdgeMax EdgeRouter 4 192.168.100.9
Mikrotik Wireless Wire RBwAPG-60ad to ORCA
airFiber 60 LR 192.168.100.11 to K6MPP
airFiber 5XHD AREDN LAN to San Bruno Mtn
EdgeSwitch8 192.168.100.25 VLAN 25
EdgePower 54V
VLANs
VLAN Description
1 AREDN WAN
2 AREDN DtD
3 AREDN LAN
4 AMPRNET 44.4.59.0/24
5 MultiWAN
12 ORCA XLINK
13 San Bruno Mtn XLINK
25 Management
26 K6MPP-INTERNET 192.168.0.0/24
Edge Router 4
Port Description VLANs Notes
Eth0 K6MPP-INTERNET - Blue cable
Eth1 AMPRNET 44.4.59.0/24 - White cable
Eth2 Management - Yellow cable
Edge Power 54V
Port Description VLANs PoE Notes
1 To hAP AC2 - Off TODO: Enable power and use an inline converter to power hAP ac2
2 - Off
Edge Switch 8
Port Description VLANs PoE Notes
1 AREDN NanoSwitch on Tower 1, 2, (3) 24V Black cable (unknown markings)
2 San Bruno Dish (3), 4, 5, 13, 25 24V Black cable + Yellow tape
3 KPFA Studio (4) Off Blue cable
4 Router / Eth0 - K6MPP (26) Off Blue cable
5 Router / Eth1 - AMPRNET (4) Off White cable
6 Router / Eth2 - Management (25) Off Yellow cable
7 K6MPP (26) 24V airFiber 60 LR, Black cable + blue tape
8 ORCA 4, 5, 12, 25 802.3af/at Black cable (unknown markings)
9 hAP AC2 1, 2, 3, 4, 5, 12, 13, (25), 26 -
10 Internet (4) -

Plans (proposed)

  • Replace San Bruno Mtn radio
    • Replace current radio (only radio) with an LTU model to we have the future option to light up Building 4 with the same dish.

Backbone

FishRanchAntennas.jpg

Dish to San Bruno

Radio: Ubiquiti airFiber 5XHD

Frequency: 5.99 GHz (Unlicensed use - FCC note)

Bandwidth: 60 MHz

Antenna: Ubiquiti RD-5G30-LW 30 dBi

Location: 37.865191, -122.221158

Altitude: 466m

Bearing: -

Nodes

KJ6WEG-OAK-FishRanch-hAP

Radio: Mikrotik hAP AC2

Antenna: -

Location: 37.865191, -122.221158

Altitude: -

Bearing: -

KJ6WEG-OAK-FishRanch-SectorM5

Radio: Ubiquiti Rocket M5 XW

Antenna: 120° Sector, 19 dBi

Location: 37.865191, -122.221158

Altitude: 455m

Bearing: Pointing towards Oakland flats

KJ6WEG-OAK-FishRanch-PBM5

Radio: Ubiquiti PowerBeam M5 400-ISO

Antenna: 25 dBi (built-in)

Location: 37.865191, -122.221158

Altitude: 455m

Bearing: -

Contacts

  • Christiaan Adams - KJ6WEG - csadams@gmail.com