Bay Area Mesh Phone Exchange

From Bay Area Mesh
Revision as of 18:10, 28 May 2023 by Kj6dzb (talk | contribs) (progress made!)
Jump to navigation Jump to search

Welcome to the BAMphone wiki!!! here with instructions

bambox was set up with the help of K6DLC, N2MH, K0DDYY.

Signup HERE

Use the form to signup for a Line or Conference on the PBX. You will be provided with a extension # and password. Your extension is your User Name!!!

PBX Server INFO:

Server DNS: bambox.local.mesh
IP: 10.145.91.200
port: 5061
Codec G711u

SORRY!!! I will not cover how to configure specific phones. Please look for help in the AREDN forms, ARDEN Community Slack for help.

BAMphone Functions (internal)

The PBX has a number of services including: Voicemail, Conference lines, and MORE!!! Listed blow!

Dial Code Functions / Conference Extension
5100 BAM Conference Room Main
5202 Bay Conference
5201 Golden Gate
5293 MeetMe conference bridge
5211 Mark N2MH Test
5252 BAM VoiceMail access
5291 DTMF test
5292 Date and Time
5293 MeetMe conference bridge
5294 Echo test
5295 Milliwatt (1 KHz tone)
5296 3-tone slope (404,1004,3004 Hz tones)
5297 Switch ID (cw)
5298 Extension ID readback
* Direct Dial Prefix
** In-Call Asterisk Disconnect Code
*0 Speeddial prefix
*1 In-Call Asterisk Toggle Call Recording
*10 Contact Manager Speed Dials
*2 In-Call Asterisk Attended Transfer
*8 Asterisk General Call Pickup
*21 Findme Follow Toggle
*30 Blacklist a number
*31 Remove a number from the blacklist
*32 Blacklist the last caller
*34 Perform dictation
*35 Email completed dictation
*36 *36 - Change status to clean for a room.
*37 *37 - Add a product from mini-bar for a room.
*43 *43 - Echo Test
*44 *44 - Send a message number to the receptionist.
*45 *45 - Allow Dynamic Members of a Queue to login or logout. See the Queues Module for how to assign a Dynamic Member to a Queue.
*46 *46 - Queue Pause Toggle
*47 *47 - Playback Queue Caller Count
*52 *52 - Call Forward No Answer/Unavailable Activate
*53 *53 - Call Forward No Answer/Unavailable Deactivate
*54 *54 - User Intercom Allow
*55 *55 - User Intercom Disallow
*60 *60 - Speaking Clock
*65 *65 - Speak Your Exten Number
*68 *68 - Wake Up Calls
*69 *69 - Call Trace
*70 *70 - Call Waiting - Activate
*71 *71 - Call Waiting - Deactivate
*72 *72 - Call Forward All Activate
*73 *73 - Call Forward All Deactivate
*74 *74 - Call Forward All Prompting Deactivate
*75 *75 - Set user speed dial
*76 *76 - DND Toggle
*78 *78 - DND Activate
*79 *79 - DND Deactivate
*8 *8 - Asterisk General Call Pickup
*80 *80 - Intercom prefix
*85 *85 - Pickup ParkedCall Prefix
*86 *86 - Force Park into Private Lot
*87 *87 - Conference Status
*88 *88 - Park to your Assigned Lot
*90 *90 - Call Forward Busy Activate
*91 *91 - Call Forward Busy Deactivate
*92 *92 - Call Forward Busy Prompting Deactivate
*93 *93 - Call Forward All Prompting Activate
*94 *94 - Call Forward Busy Prompting Activate
*95 *95 - Call Forward No Answer/Unavailable Prompting Activate
*96 *96 - Call Forward Toggle
*97 *97 - My Voicemail
*98 *98 - Dial Voicemail
## ## - In-Call Asterisk Blind Transfer
555 ChanSpy
7777 Simulate Incoming Call

Local WhitePage, N2MH MeshPhone℠ WhitePages,

  1. S
  2. short wiki with instructions on how to dial local & trunk lines & dial by IP.
    1. ff
  3. How the voicemail works.
    1. s
  4. Connection info for the server
  5. Phone setup info.



http://bambox.local.mesh/admin


Linking too mark's pages as needed for reference.


...