Fish Ranch

From Bay Area Mesh
Jump to navigation Jump to search
View south from Fish Ranch

Site located in the Oakland Hills, just off Grizzly Peak Boulevard. Near the KPFA transmitter (map) (photos)

Nodes

KJ6WEG-OAK-FishRanch-HAP2

  • Radio: Mikrotik hAP AC2
  • Antenna: -
  • Location: 37.865191, -122.221158
  • Altitude: -
  • Bearing: -

KJ6WEG-OAK-FishRanch-SectorM5

  • Radio: Ubiquiti Rocket M5 XW
  • Antenna: 120° Sector, 19 dBi
  • Location: 37.865191, -122.221158
  • Altitude: 455m
  • Bearing: Pointing towards Oakland flats

KJ6WEG-OAK-FishRanch-PBM5

  • Radio: Ubiquiti PowerBeam M5 400-ISO
  • Antenna: 25 dBi (built-in)
  • Location: 37.865191, -122.221158
  • Altitude: 455m
  • Bearing: -

Backbone

FishRanchAntennas.jpg

Dish to San Bruno Mtn

  • Radio: Ubiquiti LTU Rocket
  • Frequency: 6.025 GHz (FCC OET Experimental License WN2XRO)
  • Bandwidth: 40 MHz
  • Antenna: Ubiquiti RD-5G30-LW 30 dBi
  • Location: 37.865191, -122.221158
  • Altitude: 466m
  • Bearing: 224°

Site Details

Configuration

Fish Ranch currently hosts an EdgeSwitch8, and EdgePower 54V 72W and a EdgeMax Edge Router 4. The EdgeMax router provides access to a WAN connection (76.77.176.217) down the hill via an airFiber 60 LR from K6MPP. The WAN connection is currently disabled (July 22nd, 2022).

Fish Ranch connects to ORCA using a Mikrotik Wireless Wire RBwAPG-60ad (60GHz, 1Gbit Full Duplex)

Devices
Device IP Notes
EdgeMax EdgeRouter 4 192.168.100.9
Mikrotik Wireless Wire RBwAPG-60ad to ORCA
airFiber 60 LR 192.168.100.11 to K6MPP
airFiber 5XHD AREDN LAN to San Bruno Mtn
EdgeSwitch8 192.168.100.25 VLAN 25
EdgePower 54V
VLANs
VLAN Description
1 AREDN WAN
2 AREDN DtD
3 AREDN LAN
4 AMPRNET 44.4.59.0/24
5 MultiWAN
12 ORCA XLINK
13 San Bruno Mtn Building 7 XLINK
19 San Bruno Mtn Building 4 XLINK
25 Management
26 K6MPP-INTERNET 192.168.0.0/24
Edge Router 4
Port Description VLANs Notes
Eth0 K6MPP-INTERNET - Blue cable
Eth1 AMPRNET 44.4.59.0/24 - White cable
Eth2 Management - Yellow cable
Edge Power 54V
Port Description VLANs PoE Notes
1 To hAP AC2 - 54V Connects to hAP via a 54V-to-24V PoE adaptor
2 - 54V
Edge Switch 8
Port Description VLANs PoE Notes
1 AREDN NanoSwitch on Tower 1, 2, (3) 24V Black cable (unknown markings)
2 San Bruno Dish (3), 4, 5, 13, 19, 25 24V Black cable + Yellow tape
3 KPFA Studio (4) Off Blue cable
4 Router / Eth0 - K6MPP (26) Off Blue cable
5 Router / Eth1 - AMPRNET (4) Off White cable
6 Router / Eth2 - Management (25) Off Yellow cable
7 K6MPP (26) 24V airFiber 60 LR, Black cable + blue tape
8 ORCA 5, 12, 25 802.3af/at Black cable (unknown markings)
9 hAP AC2 1, 2, 3, 5, 12, 13, 19, (25), 26 -
10 Internet (4) -

Future Plans

  • None

Completed Work

June 2023

Contacts

Site Admin

  • Christiaan Adams - KJ6WEG - csadams@gmail.com

Mesh Admin

  • Christiaan Adams - KJ6WEG - csadams@gmail.com